Exfo iOLM Manual do Utilizador descarregar pdf (Página 156)

Maintenance

150 iOLM

Cleaning EUI Connectors

To clean EUI connectors:

1. Remove the EUI from the instrument to expose the connector

baseplate and ferrule.

2. Moisten a 2.5 mm cleaning tip with one drop of isopropyl alcohol

(alcohol may leave traces if used abundantly).

3. Slowly insert the cleaning tip into the EUI adapter until it comes out on

the other side (a slow clockwise rotating movement may help).

4. Gently turn the cleaning tip one full turn, then continue to turn as you

withdraw it.

5. Repeat steps 3 to 4 with a dry cleaning tip.

Note: Make sure you don’t touch the soft end of the cleaning tip.

WARNING

Looking into the optical connector while the light source is active

WILL result in permanent eye damage. EXFO strongly recommends

to TURN OFF the unit before proceeding with the cleaning

procedure.

Push

Tur n

Pull

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 185 186

Sem comentários

Exfo iOLM Manual do Utilizador Página 156