Exfo IQS-12004B DWDM Passive Component Test System for Manual do Utilizador descarregar pdf (Página 174)

100

101

Using the Power Meter Linearity Verification Tool

162 IQS-12004B

Verifying Linearity on a Specific Channel

3. If you need to save the results for future use in a spreadsheet, specify a

new filename. You can directly type it in the entry zone or use the

browse button. If you use the name of an already-existing file, the data

related to the previous test will be lost.

If you want information about the DUT and reference power meter to

be added at the beginning of the file, choose Header from the Results

File panel.

4. To be able to view and print a report with the data that will be obtained

for the new channel, choose Save from the Report panel.

Note: It is also possible to save a report from the Reports function tab. However,

this operation must be made before verifying another channel.

The saved file will automatically be named in the following format:

5. Connect the patchcord between the coupler and the channel to be

tested.

6. Use the Start button from the Test panel to start the verification. The

results will be displayed both in a graph and in a grid.

If both increasing and decreasing power directions were chosen, the

tool will take all the measurements for decreasing and then all the

measurements for increasing.

7. Repeat steps 1 to 6 for each channel of the DUT.

0128007-39_Increase_Ch1.rp

Power

direction

Serial number

Report file

extension

Channel number

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 436 437

Comentários a estes Manuais

Sem comentários

Exfo IQS-12004B DWDM Passive Component Test System for Manual do Utilizador Página 174

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Exfo IQS-12004B DWDM Passive Component Test System for